Adjustments; Seat - Invacare rea Bellis User Manual

1.
2.
3.
Tools: 5 mm Allen Key
4.
Tools: 4 mm Allen Key
12

Adjustments

A
A

SEAT

1. Seat plate
®
The Rea™ Bellis™ has an anatomically designed
seat plate to provide proper stability and very
good
seating comfort.
2. Seat cushion
The seat cushion is secured to the seat plate with
velcro strips.
3. Seat depth
Loosen the catches of the legrests and swing them
outwards towards the sides. Then loosen the
two screws (A) using an Allen key. Note that the
screws must only be loosened a few turns, not
unscrewed completely. Lift up the seat cushion
slightly. Take hold of the front edge of the seat
frame and pull the frame and cushion to the new
position. Then retighten both screws (A).
To obtain a precise setting for the seat depth,
there is a cm scale on the frontal seatplate enabling
you to set the correct seat depth easily. You also
get a reminder that the risk of tipping forwards
incRea™ses if you incRea™se the seat depth.
4. Seat width (only with flip-up armrests)
The width of the seat is adjusted by moving the
side supports. Pull the upholstery carefully to one
side. Loosen the two screws (A) with a 4-mm
Allen key and move the side supports to the
desired position. There are three positions: posi-
tion 1 cRea™tes a narrower chair and position 3
cRea™tes a wider chair.
®
REA BELLIS