Turning On The Power; Initial Unit Setup; Figure 4 ─ Login Screen; Figure 5 ─ Logout Screen - Eneo DLR-1004/500V Operating Instructions Manual

User's Manual

Turning on the Power

Connecting the power cord to the DVR turns on the unit. The unit takes approximately 60 seconds
to initialize.

Initial Unit Setup

Before using your DVR for the first time, you will want to establish the initial settings. This
includes items such as time and date, display language, camera, record mode, network and password.
Your DVR can be set up using various screens and dialog boxes.
Throughout the screens you will see
on the remote control gives you the opportunity to reset that screen to its default settings. After
you are finished with any setup screen, you can highlight Save and press the
the changes and exit the screen. If you do not wish to save the changes, highlight Cancel and
press the button to exit the screen.
Press the button on the remote control or move the mouse pointer to the top of the screen
Menu
and then select (Login) in the Live Monitoring menu to enter the setup screens. The Login
screen appears.
Figure 4 ─ Login screen.
NOTE: If you cannot use the remote control buttons, click the
to enter a password, and the virtual keyboard displays. See instructions below for using
the virtual keyboard.
NOTE: To log the user out of the system, press the
move the mouse pointer to the top of the screen and then select
Monitoring menu. The Logout screen displays asking you to confirm whether or not you
want to log out the current user.
Figure 5 ─ Logout screen.
8
. Highlighting the
Enter the password by pressing the appropriate combination of Camera
number buttons and then the
when logging in for the first time.
NOTE: To assure the secure management of the system,
setting up a password is strongly recommended.
and pressing the
button. There is no default password
button using the mouse
button on the remote control or
Menu
(Logout) in the Live
(Enter) button
button to save