Panic Button; Layout Button; Zoom Button; Ptz Button - Eneo DLR-2116/1.0TBV Operating Instructions Manual

Panic Button

Pressing the button starts panic recoding of all camera channels, and displays on the screen. Pressing the
PANIC
button again will stop panic recording.

Layout Button

Pressing the button toggles between different display formats. The available formats are: 4x4, 3x3, 1+7, 1+5,
LAYOUT
2x2 and PIP.

Zoom Button

Pressing the button zooms the current image on the screen. A PIP with a rectangle temporarily displays showing
ZOOM
what area of the screen has been enlarged. You can use the arrow buttons to move the rectangle to another area.

PTZ Button

Pressing the button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control properly configured cameras.
PTZ

Enter Button

The (Enter) button selects a highlighted item or completes an entry that you have made during system setup. This
button is also used to enter the Cameo mode in the Live Monitoring mode or Search mode.

Alarm Button

Pressing the button resets the DVR's outputs including the internal buzzer during an alarm.
ALARM

PTZ Control Buttons

While in the PTZ mode, the
PRESET
to Zoom In and Zoom Out, and the

Back Up Button

Pressing the button allows you to copy video clips.
BACK UP

Calendar Button

In the search mode, pressing the

Turning on the Power

Connecting the power cord to the DVR turns on the unit. The unit takes approximately 50 seconds to initialize.

Initial Unit Setup

Before using your DVR for the first time, you will want to establish the initial settings. This includes items such as
time and date, display language, camera, remote control, record mode, network and password. Your DVR can be set
up using various screens and dialog boxes.
buttons are used to save Presets and load a Preset View, the
buttons are used for Near Focus and Far Focus.
FOCUS
button displays the Calendar Search screen.
CALENDAR
Digital Video Recorder
buttons are used
ZOOM
11