Bookmark Button On Remote Control; Turning On The Power; Initial Unit Setup; Figure 5 - Login Screen - Eneo DLR4B-08/500DV Operating Instructions Manual

Bookmark Button on Remote Control

When in the playback mode, pressing the
moves to the registered bookmark point.

Turning on the Power

Connecting the power cord to the DVR turns on the unit. The unit takes approximately 60 seconds to initialize.

Initial Unit Setup

Before using your DVR for the first time, you will want to establish the initial settings. This includes items such as
time and date, display language, camera, remote control, record mode, network and password. Your DVR can be set
up using various screens and dialog boxes.
Throughout the screens you will see
reset that screen to its default settings. After you are finished with any setup screen, you can highlight Save and press
the button to save the changes and exit the screen. If you do not wish to save the changes, highlight Cancel and
press the button to exit the screen.
Press the button or move the mouse pointer to the top of the screen and then select
MENU
Monitoring menu to enter the setup screens. The Login screen appears.
Figure 5 — Login screen.
NOTE: To assure the secure management of the system, setting up a password is strongly recommended.
If you cannot use the front panel buttons, click the
the virtual keyboard displays. See instructions below for using the virtual keyboard.
To log the user out of the system, press the
screen and then select
you to confirm whether or not you want to log out the current user.
Figure 6 — Logout screen.
button adds the current playback point to the bookmark list or
BOOKMARK
. Highlighting the and pressing the
Select a User and enter the password by pressing the appropriate combination of
Camera number buttons and then the
logging in the admin user for the first time. If you do not know the password, click
the button for guidance.
MENU
(Logout) in the Live Monitoring menu. The Logout screen displays asking
button gives you the opportunity to
button. There is no default password when
button using the mouse to enter a password, and
button or move the mouse pointer to the top of the
Digital Video Recorder
(Login) in the Live
11