Recording Setup; Record; Figure 29 ─ Record Menu; Figure 30 ─ Record Setup Screen - Eneo DLR-1004/500V Operating Instructions Manual

Digital video recorder, 4-channel, h.264
Table of Contents

Advertisement

Recording Setup

Record

Highlight Record in the Record menu and press the
Figure 30 ─ Record setup screen.
Highlight the Event Record Dwell box and set the length of time you would like to record for
the associated event. You can set the dwell from 5 seconds to 15 minutes. Refer to Event Actions
screen in this chapter for information regarding event recording.
Highlight the box beside Auto Deletion, and use the Left and Right arrow buttons to adjust the
length of time recorded data will be kept from 1 to 999 days. The DVR automatically deletes
video recorded earlier than the user-defined period under three conditions: at midnight, whenever
the system reboots or whenever the user changes the Auto Deletion settings. Selecting Never
will disable the Auto Deletion function.
Highlight the slide bar beside Limit Time-Lapse Recording, and use the Left and Right arrow
buttons to adjust the length of the maximum storage time for time-lapse recording from 1 to 99
days. The Limit Time-Lapse Recording feature will function when the storage device has enough
space to record video data longer than the preset period. When this feature is On, the DVR records
over the oldest "time-lapse" video once all available storage has been used in the Recycle mode,
so more event video can be saved. Selecting Never will disable the Limit Time-Lapse Recording
function.
NOTE: When the storage device does not have enough space to record video data longer
than the preset Limit Time-Lapse Recording period, the DVR records over the oldest video
data (time-lapse or event video) as it would in the Recycle mode even if this feature is turned
On.
NOTE: The maximum storage time is only an estimate because the amount of space required
to store video varies depending on many factors such as motion and image complexity.
Figure 29 ─ Record menu.
button. The Record setup screen appears.
Highlighting Recycle and pressing the
toggles between On and Off. In the Recycle
mode, the DVR records over the oldest video
data once all available storage space has been
used. When Recycle is turned off, the DVR
stops recording once all available storage space
has been used.
Highlight the Resolution box and select from
Very High, High and Standard.
4-Channel Digital Video Recorder
button
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents