Table of Contents
Advertisement
ID Button on Remote Control
If a DVR System ID is set to 0, the infrared remote control will control that DVR without any additional operations.
(Refer to the System – General setup screen in this chapter for further information on setting the System ID.) If the
system ID is 1 to 16, you must to press the
in order to control that DVR. If the System ID of two or more DVRs is set to 0, those DVRs will react to the infrared
remote control at the same time.
Bookmark Button on Remote Control
When in the playback mode, pressing the
moves to the registered bookmark point.
Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit takes approximately one minute and 30 seconds to
initialize.
Initial Unit Setup
Before using your DVR for the first time, you will want to establish the initial settings. This includes items such as
time and date, display language, camera, remote control, record mode, network and password. Your DVR can be set
up using various screens and dialog boxes.
Throughout the screens you will see
reset that screen to its default settings.
After you are finished with any setup screen, you can highlight Save and press the
exit the screen. If you do not wish to save the changes, highlight Cancel and press the
Press the
button or move the mouse pointer on the right edge of the screen and then select
MENU
Monitoring menu to enter the setup screens. The Login screen appears.
Figure 5: Login screen.
button on the remote control and then press the number button (1 to 16)
ID
button adds the current playback point to the bookmark list or
BOOKMARK
. Highlighting the
Highlighting This page or All pages and pressing the
page or all pages of the screen to its or their default settings.
Select a User and enter the password by pressing the appropriate
combination of Camera number buttons and then the
is no default password when logging in the admin user for the first
time. If you do not know the password, click the
and pressing the
button gives you the opportunity to
button to save the changes and
Digital Video Recorder
button resets the current
button to exit the screen.
(Login) in the Live
button. There
button for guidance.
11
Advertisement
Table of Contents
