Setting The Mode; Setting Panel Protection; Setting The Cloth Setting Position (-52 Specifications) - Brother DH4-B981 Instruction Manual

I. Setting the mode
C
1 2 3 4 5 6 7 8
OFF
J. Setting panel protection
C
1 2 3 4 5 6 7 8
OFF
K. Setting the cloth setting position (-52 specifications)
C
1 2 3 4 5 6 7 8
OFF
No. 1 No. 2 Mode
ON
Feed mode
OFF
ON
Manual mode
OFF
Automatic mode
OFF OFF
No. 3 Condition
Changing cutting on/off,
ON
stitch length settings prohibited
Changing cutting on/off,
OFF
stitch length settings allowed
No. 6 Cloth setting position
ON
Left setting
Horizontal setting
OFF
1. Turn off the power.
2. Change the settings for panel DIP switch C No. 1 and
2. No. 2 to set the desired mode.
3. Turn on the power.
* Feed mode is used to move only the feed bracket
* without sewing, in order to check the position of the article.
* Manual mode is used when sewing while turning the
* upper shaft by hand, in order to check operation.
* Automatic mode is used when carrying out sewing.
0916Q
1. Turn off the power.
2. Change the settings for panel DIP switch C No. 3 to
2. set the desired condition.
3. Turn on the power.
0917Q
1. Turn off the power.
2. The cloth setting position can be set to either left setting
2. or horizontal setting.
2. Setting is possible when the cloth setting bar is at the
2. left setting position.
3. Change the settings for panel DIP switch C No. 6 to
3. set the desired cloth setting position.
4. Turn on the power.
4. * When set to the left setting position, cloth setting is
4. * always carried out at the left setting position.
4. * When set to the horizontal setting position, cloth
0918Q
4. * setting is carried out at both the left and right setting
4. * positions.
DH4-B981
6. USING THE OPERATION PANEL
37