Setting The Offset (Setting The Taper Bar Tacking Overlap); Setting The Cutting Space; Setting The Sewing Speed - Brother DH4-B981 Instruction Manual

6. USING THE OPERATION PANEL
F. Setting the offset (setting the taper bar tacking overlap)
B
1 2 3 4 5 6 7 8
OFF
G. Setting the cutting space
B
1 2 3 4 5 6 7 8
OFF
H. Setting the sewing speed
B
1 2 3 4 5 6 7 8
OFF
36
No. 4 Offset
ON
1.2 mm
1.5 mm
OFF
No. 5 No. 6 Cutting space
ON ON
-0.1 mm
ON
0 mm
OFF
ON
0.1 mm
OFF
0.2 mm
OFF OFF
No. 7 No. 8 Sewing speed
ON
1,400 rpm
OFF
ON
1,600 rpm
OFF
1,800 rpm
OFF OFF
ON ON
2,000 rpm
1. Turn off the power.
2. The offset can be set to 1.2 mm or 1.5 mm.
3. Change the setting for panel DIP switch B No. 4 to set
3. the desired offset.
4. Turn on the power.
0913Q
1. Turn off the power.
2. The cutting space can be set to between -0.1 - 0.2
2. mm.
3. Change the settings for panel DIP switch B No. 5 and
3. No. 6 to set the desired cutting space.
4. Turn on the power.
0914Q
1. Turn off the power.
2. The sewing speed can be set to between 1,400 -
2. 2,000 rpm.
3. Change the settings for panel DIP switch B No. 7 and
3. No. 8 to set the desired sewing speed.
4. Turn on the power.
0915Q
DH4-B981