Understanding Additional Configuration Options - Cisco 7920 Phone Manual

Understanding Additional Configuration Options

Your system administrator can configure your phone to use specific softkey templates along with
special services and features, if appropriate. The table below provides an overview of some
configuration options that you might want to discuss with your phone system administrator based on
your calling needs or work environment.
You can locate User Guides and other documents listed in this table from the following URL:
Note
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
If you...
Need to handle
more calls on your
phone line
Need more than
one phone line
Need different
softkeys, such as
Mute or iDivert to
display when
phone is ringing or
in use.
Need more speed
dial numbers
Want to use one
directory number
for several phones
Cisco Unified Wireless IP Phone 7920 for Cisco Unified CallManager 5.0 (SCCP)
Then...
Ask your system administrator to
configure your line to support more calls.
Ask your system administrator to
configure one or more additional directory
numbers for you.
Ask your system administrator to
configure a new softkey template and
assign it to your phone.
First make sure that you are using all of
your currently available speed dial
numbers.
If you need additional speed dial numbers,
try using Abbreviated Dialing or
subscribing to the Fast Dial service.
Request a shared line. This allows you to
use one number for your desk phone and
Cisco Unified Wireless IP Phone, for
example.
Understanding Additional Configuration Options
For more information...
Talk to your system administrator
or phone support team.
Talk to your system administrator
or phone support team.
Talk to your system administrator
or phone support team.
See the:
• "Speed Dialing" section on
page 47
• "User settings include your
password, PIN, and language
(locale) settings." section on
page 67
See the "Using a Shared Line"
section on page 38.
71