Connecting Your Phone; Installing Or Removing The Phone Battery - Cisco 7920 Phone Manual

Connecting Your Phone

Your system administrator will configure your new Cisco Unified Wireless IP Phone to connect to the
corporate Voice over Wireless LAN (VoWLAN) IP telephony network.

Installing or Removing the Phone Battery

You must install and charge the battery before you can use the Cisco Unified Wireless IP Phone 7920.
To install or remove the battery, follow these steps:
If you want to...
Install the battery
Remove the battery
1 Locking catch—Press to release the battery.
Battery catches—Insert these into the slots near the bottom of the phone at battery installation.
2
Metal contacts—Match the contacts on the battery to the contacts on the phone.
3
14
Then...
1. Insert the battery catches in the slots at the bottom of the phone. The
metal contacts on the battery and the phone must face each other.
2. Press the battery to the phone until it locks into place.
1. Press down on the locking catch.
2. Lift and remove the battery.
1
3 2
2
OL-9474-01