Intel PT-6IBT User Manual page 27

440BX/ZX AT
5. PW Power On / Off and External Suspend Switch Connector
5-a. When this mainboard has the ATX power supply connected, According to the
setup in CMOS, the PW connector has two functions. It can be the Power
Switch or Suspend Switch of your PC system.(please refer to Section- 4-7 and
section 4-8 for BIOS setup)
Q
If the setup in CMOS is "Delay 4 Sec.", the switch function will be:
A. When system is power off :
Press this switch, the system will power on. (when "password" is
selected in the CMOS setup program, you will be unable to use the PW
button to turn on the power of the PC system, please see Section 2-2
and Section 4-7 for more details. )
B. When system power is on :
a. The system is in Full-ON mode :
a-1. Click on this switch ( less than 4 seconds ), the system will be
a-2. Press and hold this switch for more than 4 seconds, the system
b. When the system is in Suspend mode :
b-1. Click on this switch ( less than 4 seconds ), the system will
b-2. Press and hold this switch more than 4 seconds, the system will
R
The setup in CMOS is "Instant-off":
A. When system power is off :
Click on this switch, the system will be powered on. (when
"password" is selected in the CMOS setup program, you will be
unable to use the PW button to power on the PC system, please see
Section 2-2 and Section 4-7 for more details. )
B. When system power is on :
Click on this switch, the system will be powered off instantly.
MAINBOARD
turned into Suspend mode. (get into a GREEN mode)
will be powered off.
return to Full-ON mode.
be powered off.
AWARD BIOS SETUP
3-13