Replacing Lower oven temperature Probe
To remove and replace the lower oven temperature
Cover Plate
Photo A
probe remove the access cover plate located at the
Mounting Screw
right rear of the range when viewed from behind.
(Photo A)
Take out the cover plate mounting screw and remove
Photo B
the cover.
Once the cover plate is removed the lower oven
temperature probe connector can be disconnected
from the harness connector on the right side of the
opening. (Photo B)
Lower Oven Temp Probe
Harness Connector
Unplug the lower oven temperature probe connector
Photo C
and remove the two screws that mount the probe to
Probe
the rear of the lower oven chassis. (Photo C)
Mounting
Screws
The probe can now be pulled out of the chassis.
Page 38