How To Replace The Oven Temperature Probe; How To Replace The Relay Board - Electrolux Built-in Wall Oven Service Manual

36
Section D - Replacement of parts

7.0 HOW TO REPLACE THE OVEN TEMPERATURE PROBE

Figure 13
Figure 14

8.0 HOW TO REPLACE THE RELAY BOARD

Figure 15
1. Disconnect wall oven from electrical supply.
2. Remove wall oven from the cabinet. (section 1.0)
3. Remove the back panel. (section 2.0)
4. Unplug the quick connect from the temperature probe.
(Figure 13)
5. By the inside of the oven remove the 2 screws holding
the oven temperature probe. (Figure 14)
6. Replace the probe and reassemble in reverse order.
1. Disconnect wall oven from electrical supply.
2. Remove wall oven from the cabinet. (section 1.0)
3. Remove the back panel. (section 2.0)
4. Remove the 2 screws.
5. Pinch slightly the plastic end. (Figure 15)
6. Replace the relay board and reassemble in reverse order.