2
Disassembly
Disassembly
To remove fascia panel to access control module & dispenser, remove (4) T-20 Torx front/side screws and lift
panel up. Caps over screws can be removed using fingernails or a sharp knife – take care not to scratch
fascia panel or caps.
702_58300000133618_ara_en_a
–
Fascia (Control) Panel (1)
–
Fascia (Control) Panel (1)
T-20 screws
When reassembling
panels,
tuck rear
tabs
under
top
st
panel 1
.
Knobs are permanently attached to
panels and cannot be removed.
Rev 0 (1/17/08)