Routine Maintenance - Miller PipePro 304 Owner's Manual

8-2. Routine Maintenance

Note
Follow the storage procedure in the engine owner's manual if the unit will not be used for an
extended period.
Wipe Up
Spills.
Check fuel lines
and connections.
See Section 8-5.
Service air filter element.
See Section 8-4.
Clean and
tighten battery
connections.
Change oil. See Section 8-5
and maintenance label.
Check radiator
hoses and
clamps.
OM-492 Page 28
Every 8 h
Recovery Tank
Every 20 h
Check and clean optional
spark arrestor screen.
See Section 8-3.
Every 50 h
Every 100 h
Every 200 h
Replace unreadable
labels.
Every 400 h
Replace secondary
fuel filter. See
Section 8-5.
Return To Table Of Contents
Y Stop engine before maintaining.
.
See also Engine Manual and Maintenance Label.
Recycle
engine Service engine more often if used in severe condi-
fluids. tions.
* To be done by Factory Authorized Service Agent.
Full
FUEL
Check Fluid
WATER
Levels. See
Section 5-2.
Clean and
tighten weld
terminals.
Check air cleaner
hoses for cracks
and loose clamps.
Check belt tension.
Change oil filter. See
Section 8-5 and
maintenance label.
Replace primary
fuel filter. See
Section 8-5.
Drain Water From
Fuel System. See
Section 8-5.
5/16 in.
(8 mm)