Operating Engine Block Heater - Miller PipePro 304 Owner's Manual

5-10. Operating Engine Block Heater

Coolant Heater Specifications
±
Watts Volts 10%
400 120
Notes
Start Your Professional
Welding Career Now!
1
Amps
3.3
400 Trade Square East, Troy, Ohio 45373
1-800-332-9448 www.welding.org
Return To Table Of Contents
2
Over 80,000 trained
Y Do not run engine while cool-
ant heater is on.
Y Do not touch hot engine
block. Engine block gets hot
near heater.
1 Coolant Heater
2 Heater Plug
Use heater to maintain a constant
engine coolant temperature. See
table for heater specifications.
To turn on heater, connect heater
plug to a 120 volt ac grounded re-
ceptacle.
To turn off heater, disconnect plug.
Ref. 802 330 / 803 393
since 1930!
OM-492 Page 19