Dimensions, Weights, And Operating Angles; Duty Cycle And Overheating - Miller PipePro 304 Owner's Manual

4-2. Dimensions, Weights, and Operating Angles

Dimensions
Height 36 in (914 mm)
Width 24 in (610 mm)
Depth 59 in (1499 mm)
A 23-5/8 in (600 mm)
B 21-1/2 in (546 mm)
C 1 in (25 mm)
D 15-5/8 in (397 mm)
E 26-3/8 in (679 mm)
F 58-3/4 in (1492 mm)
G 13/32 in (10 mm) Dia.
Weight
925 lb (420 kg) 925 lb (420 kg)

4-3. Duty Cycle And Overheating

6 Minutes Welding
Overheating
OM-492 Page 10
A A
B B
C C
D D
E
F F
Front Panel End Front Panel End
60% Duty Cycle
4 Minutes Resting
0
15
Minutes
Return To Table Of Contents
Y Do not exceed tilt angles or engine could Y Do not exceed tilt angles or engine could
be damaged or unit could tip.
Y Do not move or operate unit where it could
Do not move or operate unit where it could
G
tip. tip.
4 Holes 4 Holes
°
20
° °
20 20
800 426 800 426
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
If unit overheats, output stops, a
Help message is displayed (see
Section 8-10), and cooling fan runs.
Wait fifteen minutes for unit to cool.
Reduce amperage or voltage, or
duty cycle before welding.
Y Exceeding duty cycle can
damage
warranty.
A or V
OR
Reduce Duty Cycle
°
20 20
° °
20 20
unit and void
sduty1 5/95 / 196 698