Table of Contents
Advertisement
8 - Track Editing
In the past, editing recordings made on tape recorders required
advanced techniques, but with this unit editing is easy and
accurate.
Moreover, unlike with a tape recorder when an editing error
could not be undone, this unit uses non-destructive editing,
which means you can edit without altering the original data
so the undo function can be used to correct an edit easily. (See
"Undoing an operation" on page 39.)
Overview of track editing
This unit has the following track editing functions.
• COPY/PASTE
• COPY/INSERT
• MOVE/PASTE
• MOVE/INSERT
• OPEN (insert silence)
• CUT (remove part)
• SILENCE (erase part)
• CLONE TRACK (duplicate track)
• CLEAN OUT (delete track)
Editing points
The IN, OUT and TO points are used as editing points for the
COPY/PASTE, COPY/ INSERT, MOVE/PASTE and MOVE/INSERT
functions.
The IN and OUT points are used as editing points for the OPEN,
CUT, and SILENCE functions.
These are the same IN and OUT points used for repeat playback.
ª IN point
The IN point is the start point for the part of the track to be
edited.
Press and hold the MARK SET button and press the IN button to
set the IN point at the current position.
ª OUT point
The OUT point is the end point for the part of the track to be
edited.
Press and hold the MARK SET button and press the OUT button
to set the OUT point at the current position.
ª TO point
The TO point is the current playback position.
NOTE
If you press the JOG PLAY button to enable jog mode, you can set
IN and OUT points with subframe (1/10 frame) precision.
48
TASCAM DP-32SD
Basic editing procedures
1. When the recorder is stopped, press the TRACK EDIT button
to open the
TRACK EDIT
2. Use the JOG/DATA dial or the CURSOR (
select (highlight blue) the desired track editing function, and
then press the F4 (
) button.
t
The corresponding function window opens.
COPY PASTE window
3. Select the setting item value.
If there are multiple setting items, use the CURSOR (
buttons to select one, and then use the JOG/DATA dial to set
the value.
4. Press the F2 (
) button to execute the function.
YES
NOTE
Press the F1 (
) button to close the
NO
without executing the function.
Explanation of items
ª SOURCE
This is the track to be edited.
The choices available depend on the editing function.
to
: Single track
•
1
12
to
: Stereo track
•
13/14
31/32
You can also use track SELECT buttons to set this.
: Every track from 1 to 32
•
ALL
COPY PASTE window
menu.
/
) buttons to
5
b
/
5
b
window
COPY PASTE
)
Advertisement
Table of Contents
