Table of Contents
Advertisement
ª IN/OUT/TO
To change the IN/OUT/TO points, exit the
and set them again as necessary.
ª TARGET Track
This is the track that is edited. In the case of OPEN, CUT, SILENCE
and CLEAN OUT, the source track itself is the target track.
The options depend on what you have set for the
.
SOURCE track
When the
is
SOURCE track
must also be
TARGET track
ª TIMES
Set the number of times that the copied section will be pasted
between
and
.
1
99
COPY/PASTE
This function copies the audio data from between the IN and
OUT points on the source track, and pastes it on the target track
starting from the TO point. This operation does not change the
source track between the IN and OUT points.
This operation overwrites recorded data on the target track.
Therefore, the length of the target track is not changed.
You can make multiple copies in a single operation.
In other words, you can overwrite the target track from the TO
point with a designated number of repetitions of the source
data.
The following parameters are used in this operation.
• SOURCE Track
• IN/OUT/TO
• TARGET
• TIMES
screen,
TRACK EDIT
(all tracks) , the
ALL
(all tracks).
ALL
8 - Track Editing
COPY/INSERT
This function copies the audio data from between the IN and
OUT points on the source track, and inserts it on the target track
starting from the TO point. This operation does not change the
source track between the IN and OUT points.
This operation inserts recorded data into the target track. The
recorded data on the target track after the TO point is offset by
the amount of time used by the inserted audio data. Therefore,
the target track becomes longer.
You can make multiple copies in a single operation. In other
words, you can insert a designated number of repetitions of the
data into the target track from the TO point.
The following parameters are used in this operation.
• SOURCE Track
• IN/OUT/TO
• TARGET
• TIMES
49
TASCAM DP-32SD
Advertisement
Table of Contents
