Jhouse Codes For X-10 Devices; Change Languages; Changing User Codes - GE NX-148E Installation And Setup

7j. HOUSE CODES FOR X-10 DEVICES
When used in conjunction with an X-10 output device such as the NetworX NX-507E, NX-508E, NX-534E
or NX-540E, this menu allows the installer to program the specific X-10 unit and house codes for the ten
X-10 devices for this keypad.
ACTION
[program code]
[X-10 unit code]
[X-10 house code]
#
7k. CHANGE LANGUAGES
ACTION
7l. CHANGING USER CODES
Tip: For partitioned systems, someone changing the code of another person must have access to all or
more partitions than the user being changed.
ACTION
[master code]
[user code]
2-digit ID if NX-4, NX-4V2, NX-6,
NX-6V2, NX-8, NX-8V2, NX-8-CF
3-digit ID if NX-8E, NX-8E-CF (use
leading zeros!! (i.e.
16
for user 7)
Prompts to "Please Enter Your Code".
Displays Light number and Unit Code.
Prompts for the House Code of the device.
Prompts for the House Code of the device.
Repeat steps 3 and 4 until all devices have been
programmed.
Exits the function.
Keypad toggles to the second language.
Keypad reverts to the first language.
Prompts "Please Enter Your Code".
Prompts for a user number.
Prompts for a new code.
RESULT
RESULT
RESULT
LCD KEYPAD