Stealth bomber Owner's Manual page 26

White Brothers Groove 200 forks - Refer to White Brothers Owner's manual for more details.
CAUTION: Pressures must not vary beyond 50-175psi in this chamber as serious injury due to chamber failure may occur.
Spring preload can be adjusted using the air preload (or nitrogen) adjuster valve located at the bottom right hand fork leg.
Compression and rebound adjustment can be found at the top and bottom of the right hand fork leg respectively.
FIGHTER
Rear Shock
WARNING: This is a sealed unit and servicing should only be carried out by a qualified repair person.
1. Unlock the preload adjustment by loosening the bottom lock ring on the spring unit using the supplied C spanner.
2. Rotate the spring and collet to increase or decrease the spring tension.
3. Re-lock the preload adjustment by turning the bottom lock ring clockwise until it locks against the spring retaining
ring.
4. Tighten with C spanner.
5. Increase or decrease the rebound damping by turning the red rebound adjuster dial in the direction required (as
indicated on the top of the shock body).
6. Increase or decrease the compression damping by turning the blue compression adjuster dial in the direction
required (as indicated on the bottom of the shock reservoir).
Compression adjustment
STEALTH ELECTRIC BIKES 2013 OWNER'S MANUAL
Rebound adjustment
V 1.2 PAGE | 26