Step by Step
j
Enter code!
n
Speaker call in a group
You can also establish a normal connection within a
group or team (with team call = speed dial numbers 0-
9 or 00-99 for team members) via a speaker call. The
speaker call is then initiated by a group telephone.
The "COM group speaker call" function is line-in-
dependent - all phones can call each other via a
speaker call.
Speaker call to a variable destination
Prerequisite: The "COM Group" key is programmed on
your telephone.
^
Lift the handset.
if available:
S Press the "COM Group" key. The LED lights up.
or
Enter the code programmed on your phone for "COM
group speaker call"
j
Enter the speed dial number for the corresponding
group member.
A connection is immediately established to this destina-
tion station's loudspeaker if
•
the station is not busy
•
the handset has not been lifted
•
"Do not disturb" is not activated
^
The called party accepts the DSS call by lifting the hand-
set.
S
or
If the called party presses the speaker key or the line
key (if configured), the connection is lost.
Enhanced phone functions
page 68.
43