Siemens HiPath 4000 OpenStage 10 T Operating Instructions Manual page 44

Enhanced phone functions
Step by Step
n
j
Enter code!
44
Speaker call to a fixed destination
The code configured for "COM group speaker call" and
the speed dial for the relevant group member are pro-
grammed on your phone.
S
Press the programmed key. A connection to the desti-
nation loudspeaker is immediately established.
^
The called party can accept the connection by lifting the
handset.
S
or
If the called party presses the speaker key or the line
key (if configured), the connection is lost.
Two-way intercom to a variable destination
When using the two-way intercom in a group, the loud-
speaker and the microphone of the destination phone
are automatically switched on.
^
Lift the handset.
if available:
S Press the "COM Spk 2way" key. The LED lights up.
or
Enter the code programmed on your phone for "Speaker
call-two-way"
j
Enter the speed dial number for the corresponding
group member.
The loudspeaker and microphone of the destination
phone are automatically switched on.
Two-way intercom to a fixed destination
The code for "Speaker call-two-way" and the speed dial
for the relevant group member are programmed on your
phone.
^
Lift the handset.
S
Press the programmed key.
The loudspeaker and microphone of the destination
phone are automatically switched on.
page 68.