During A Call; Call Waiting With A Direct Station Selection Key; Using The Second Call Feature; Activating/Deactivating Second Call - Siemens HiPath 4000 OpenStage 10 T Operating Instructions Manual

Step by Step

During a call

Call waiting with a direct station selection
key
Prerequisite: DSS keys are programmed on your
phone page 11. The line of the party you wish to call
is busy.
R
Press the DSS key.
The called party accepts your waiting call.
^
Lift the handset.
For information on the meanings of the LED dis-
plays of the DSS keys, see

Using the second call feature

You can specify whether you wish to accept a second call
(call waiting) during a call.
If your belongs to an ONS group (parallel call
page 64), please note the following:
In addition to an alert tone on the busy phone,
the second call is signaled with a ring tone on the
other phones in the ONS group.

Activating/deactivating second call

Activating
S
Press the "Camp/Overide" key. The LED lights up.
Deactivating
R Press the "Camp/Overide" key. The LED goes out.
Enhanced phone functions
page 11.
33