Transferring A Call After A Speaker Call Announcement In A Group - Siemens HiPath 500 User Manual

Step by Step
Consultation?
*80=Speaker call?
Transfer?
Transferring a call after a speaker call
announcement in a group
If this function has been configured (contact your ser-
vice personnel), you can use a speaker call (announce-
ment, page 78) to announce a call in progress to a
group of users
After a member of the group has accepted the call re-
quest, you can transfer the waiting party.
Prerequisite: You are conducting a call.
Confirm. The other party is placed on hold.
$
Press the key shown.
Select and confirm the option shown.
j
Enter the group's station number.
[
Announce the call.
When a member of the group accepts the call
page 33, you are connected to this party.
\
Replace the handset.
or
Select and confirm the option shown
If the connection between the two other parties is
not established within 45 seconds, the call from
the first part returns to you (recall).
[1] "Differing display view in a HiPath 4000 environment (not for
HiPath 500)"
Enhanced phone functions
page 42.
page 93
[1]
.
51