Nautilus EV916 Owner's Manual page 34

Max time limit
Use the numeric keypad to enter the desired
time limit between 5 and 99 minutes. Press
[ENTER] to accept the new time limit.
Change units
Use the [Level: UP] and [Level: DOWN] keys
to toggle between USA units and Metric units.
Press [ENTER] to select your option.
Choose the type of heart rate input
See Heart Rate Priority in the previous section
for details of the choices.
Choose console language
Use the [Level: UP] and [Level: DOWN] keys
to view the choices (English, German, French,
Spanish, Italian, Dutch, Swedish, Japanese).
Press [ENTER] to select your option.
Adjust upper LCD screen contrast
Use the [Level: UP] and [Level: DOWN] keys to
increase or decrease the contrast level of the
upper LCD. Press [ENTER] to select your option.
Adjust lower LCD screen contrast
Use the [Level: UP] and [Level: DOWN] keys to
increase or decrease the contrast level of the
upper LCD. Press [ENTER] to select your option.
Reset Defaults
This code will reset all exercise parameters to
the factory defaults. Press [ENTER], to accept
the default values.
3. To exit "CUSTOMIZE", press the [CLEAR] key.
32
C H A N G I N G T H E G A M E I N H E A LT H A N D F I T N E S S
CONSOLE CODES
Machine Status Codes
To view maintenance information such as the run time
in hours, number of workouts and distance, as well a
machine type and software revision:
1. Press [Level: UP], [4], [ENTER]. The console
2. Press [Level: UP] or [Level: DOWN] to scan
will display "MACHINE STATUS".
through the choices. Select the option you
want to view by pressing [ENTER]. Press
[CLEAR] to exit the machine status codes.
The machine status options are as follows:
Machine run time in hours
Display the machine run time in hours. The
console will display "RUN HOURS #####".
Number of workouts
Display the number of times a workout key
has been pressed. The console will display
"WORKOUTS ####".
Distance traveled
Display the total distance traveled in miles
(or kms if console is set to Metric units). The
console will display "DISTANCE #####".
Software revision
Display the console software revision number.
The console will display "CONS 41375-###".
Machine type
Display the machine type the console is
currently confi gured to.
display "ELLIPTICAL" or other machine type.
™
The console will