Chicago Electric 97360 Owner's Manual & Safety Instructions page 15

SAW BLADE (4)
ARROW
SAW BLADE (12)
ARROW
FIGURE 18
6. IMPORTANT: When installing a Saw
Blade (4), make sure the "ARROW"
depicted on the side of the Saw
Blade points in the same direction as
that of the Blade Guard (12).
(See Figure 18.)
7. Once the Saw Blade (4) is installed,
reattach the Outside Flange (5) and
Nut (6). Fasten the Nut by turning
it counterclockwise until snug. Do
not overtighten. (See Figure 16.)
Item 97360 For technical questions, please call 1-888-866-5797.
FIGURE 19
BOLT (91)
SPRING
WASHER
(89)
WASHER
(88)
8. Carefully lower Blade Guard (12) back into its
original position. Then secure Blade Guard
in place using the Bolts (91), Spring Washers
(89), and Washers (88). (See Figure 19.)
BOLT (91)
SPRING
WASHER
(89)
WASHER
(88)
Page 15