Chicago Electric 97360 Owner's Manual & Safety Instructions page 14

To Change The Saw Blade:
WARNING! Make sure the Power Switch (37)
of the Tile Saw is in its "OFF" position and
that the unit is unplugged from its electrical
outlet before performing this procedure.
BLADE GUARD
(12)
BOLT (91)
SPRING
WASHER
(89)
WASHER
(88)
FIGURE 15
1. Remove the Bolts (91), Spring Washers
(89), and Washers (88) from the Blade
Guard (12). (See Figure 15.)
2. Carefully lift up and move the Blade
Guard (12) away from the catch on
the top end of the motor support to
expose the Saw Blade.
(See Figure 16.)
3. CAUTION! Wear heavy-duty work
gloves to avoid cuts to hands.
BLADE GUARD
(12)
ROTATION
ARROW
SAW
BLADE
(4)
FIGURE 16
4. With one Wrench (71), hold the end
of the Motor Spindle firmly and with
Item 97360
BOLT (91)
SPRING
WASHER
WASHER
OUTSIDE
FLANGE
NUT (6)
For technical questions, please call 1-888-866-5797.
the other Wrench (70) provided,
unscrew and remove the Nut (6) by
turning it clockwise. Next, remove
the Outside Flange (5) and remove
told Blade. (See Figures 16 and 17.)
(89)
(88)
INSIDE
FLANGE
(3)
(DO NOT
REMOVE)
5. Install a new Saw Blade (not
included). Always use Continuous
Rim Diamond Saw Blades with a
7" diameter, 5/8" round arbor hole,
and rated at 3550 RPM or higher.
(See Figure 16.) CAUTION! Never
flip over a used Saw Blade.
(5)
SAW BLADE
WRENCH
(70)
FIGURE 17
(4)
WRENCH
(71)
Page 14