Battery Replacement - Pride Mobility Power Glide Basic Operation Instructions

18

Battery Replacement

To replace the battery in the battery pack:
1. Disconnect the battery pack from the powerpack. See figure 5.
2. Unzip the battery pack.
3. Disconnect the battery leads from the battery terminals and remove the
battery.
4. Put a new battery into the battery pack.
5. Connect the battery leads: red wire to the positive terminal (+) and black
wire to the negative terminal (-).
6. Zip the battery pack.
7. Reconnect the battery pack to the powerpack. See figure 5.
Power Glide
MANDATORY! Battery posts, terminals, and
related accessories contain lead and lead
compounds. Wear goggles and gloves when
handling batteries and wash hands after
handling.
WARNING! Always replace the battery with
the exact same type, chemistry, and amp-hour
(Ah) capacity. Refer to the specifications
table in this manual for recommended type
and capacities.
www.pridemobility.com
Basic Operation Instructions