General Description; Safety Precautions; Unit Description; Specifications - Cornelius remcor DB275--BCP Operator's Manual

Ice/beverage dispenser

Hide thumbs

Table Of Contents

Table of Contents

This section gives the Unit description, theory of operation, and design data for Ice/Beverage Dispenser, Model

number DB275--BCP

IMPORTANT: To the user of this manual -- This manual is a guide for installing, operating, and main-

taining this equipment. Refer to the Table of Contents for page location for detailed information per-

taining to questions that arise during installation, operation, service, or maintenance of this equip-

ment.

SAFETY PRECAUTIONS

Always: disconnect power to the dispenser before servicing or cleaning.

Never:

place hands inside of hopper or gate area without disconnecting power to the dispenser. Agitator

rotation occurs automatically when dispenser is energized!

This ice dispenser has been specifically designed to provide protection against personal injury and eliminates

contamination of ice. To insure continued protection and sanitation, observe the following.

Always: be sure the removable lid is properly installed to prevent unauthorized access to the hopper interior

and possible contamination of the ice.

Always: be sure the upper and lower front panels are securely fastened.

Always: keep area around the dispenser clean of ice cubes.

CAUTION: Dispenser cannot be used with crushed or flaked ice. Use of bagged ice which

has frozen into large chunks can void warranty. The dispenser agitation is not designed to

be an ice crusher. Use of large chunks of ice which "jam up" inside the hopper will cause

failure of the agitator motor and damage to the hopper. If bagged ice is used, it must be carefully

and completely broken into small, cube-sized pieces before filling into the dispenser hopper.

UNIT DESCRIPTION

The Remcor " DB"series of ice dispensers solve your ice and beverage service needs in the sanitary, space

saving, economical way. Designed to be manually filled with ice from any remote ice making source, these dis-

pensers will dispense cubes (up to 1-1/4"in size), cubelets and hard-chipped or cracked ice, and in addition,

several flavors of post-mix beverages.

The unit includes beverage faucets and a cold plate and is designed to be supplied direct from syrup tanks and

carbonator, with no addition cooling required.

Model:

Ice Storage:

Maximum Number of Faucets Available

Built-in Cold Plate

Electrical:

Dimensions:

Drain Connection 7/8 ID Hose

ICEMAKER ADAPTER KITS

Remcor model Ice/Beverage Dispensers are designed to be used with one of several different types of top-

mounted icemakers. The icemaker must be obtained from the appropriate manufacturer.

Check with a Remcor Sales Coordinator for a list of icemaker kits available for this dispenser model. The kit will

contain parts and instructions necessary to mount the selected icemaker to the dispenser.

620906904