Table of Contents
Advertisement
To Enable the LED: Press and hold
and
pause for 2 seconds, then beeps once again. Release the buttons. The parking light will flash 1
time.
Temperature Request (If ACC Temp 100 installed)
The user can request the temperature in the vehicle if a Temperature Sensor Module (ACC-Temp-
100) is installed:
x
Through advance function remote's menu (page-6), select L-01.
x
Immediately press the
button and hold it until the temperature is displayed on the
LCD screen.
Advanced Features: Installation programmable Options
The remote starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution
: The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your remote starter.
Ignition controlled Door Locks
This is an added security feature. If your Remote Car Starter was installed with the Ignition-
Controlled Door Locks option, the doors will automatically lock as soon as the ignition key is turned
to the IGNITION ON (RUN) position while the brakes are pressed. The remote car starter will also
lock any door that was unlocked and opened (then closed) the next time the brake pedal is
pressed. When the key is turned to the OFF position, the doors will automatically be unlocked.
Secure Lock
Before it can remote-start your vehicle, the remote starter must first disarm the factory security
system. The secure lock feature may be required on certain vehicle models with factory security
systems that automatically unlock the doors when the security system is disarmed. To keep your
vehicle protected when the factory security system is disarmed for a remote start, secure lock will
relock your doors as soon as the vehicle has started. Once the engine run cycle ends, secure lock
will rearm your factory security system.
Safe Start
This feature will eliminate accidental remote starts, e.g. when children are playing with the
transmitter.
Safe start enabled: If this feature is enabled, the user must press the
3 seconds to remote-start the vehicle.
Swap start: If this feature is enabled;
1.
Through advance function remote's menu (page-6), select L-01.
2.
Press
to remote start the vehicle.
The AUX 2 output can be activated by pressing the
Engine Run Time
On a gas engine, the Remote Car Starter can be programmed to run the engine for 3, 15, or
25 minutes (15 minutes by default). On a diesel engine, the Remote Car Starter can be
programmed to run the engine for 8, 20, or 30 minutes (20 minutes by default).
P.14
simultaneously until the remote beeps once,
button twice within
button.
User Guide
Hide quick links:
Advertisement
Table of Contents
