Arming And Disarming The Starter Kill (If Installed) - Directed Electronics PS-4661TWE-FM User Manual

Arming and disarming the starter kill (if installed)
This added security feature will prevent the vehicle from starting with the Ignition key when the
starter kill is armed. If the system was installed with the starter kill option, the vehicle will not be
able to start with the key unless the system has been unlocked first or put into Valet Mode
(page 10).
Note: If the Starter Kill is installed, the vehicle will benefit from a protection against starter motor
damage that could occur after remote-starting the engine should the user, by force of habit, turn
the ignition key to the CRANK position.
The Starter Kill (if installed) can be configured by the installer either to Passive Mode (so as to arm
automatically) or Active Mode (so as to require the user's intervention for arming). By default, the
Remote Car Starter is configured to Passive Mode.
Passive mode:
To arm the Starter Kill:
• Press the
button on the transmitter.
OR
• Let the Starter Kill arm automatically 1 minute (by default) or 3 minutes (if configured this way)
after the ignition is turned OFF or once the last door is closed (if the doors are monitored). The
parking lights will flash once.
•
The LED on the antenna will flash quickly during the countdown preceding the activation
of the Starter Kill.
•
Once the activation countdown expires, the LED will send a series of quick double
flashes to indicate that the Starter Kill is now armed.
To disarm the Starter Kill:
• Press the
button on the transmitter.
•
The Starter Kill will automatically rearm itself after 1 minute (by default) or 3 minutes (if
configured this way) if no door is left opened (if the doors are monitored) and the ignition
is not turned ON.
Active Mode:
To arm the Starter Kill:
• Press the
button on the transmitter.
•
The parking lights will flash once.
•
The LED on the antenna will flash slowly.
•
If remote door locks are installed, this will also lock the doors and arm the OEM-style
alarm (if configured).
To disarm the Starter Kill:
• Press the
button on the transmitter.
•
The parking lights will flash twice.
•
The LED on the antenna will remain OFF.
•
If remote door locks are installed, this will also unlock the doors and disarm the OEM-
style alarm (if configured).
User Guide P.7