Kenmore 148.03447410 Use & Care Manual page 20

SideBurnerShelf
Remove t hecapandthenutfromtheigniter.
Secure theigniter t osideburner s helf w iththenut.Then, r eassemble thecaptotheigniter.
Ig
Cap
Nut
Side Burner Shelf
Loosen and remove the two screws on the underside of the side burner holding it in place. Align the 2
bezel screw holes to those in side burner control panel. Push the side burner valve through the hole
on the side panel of the cart, insert the valve control stem through the hole in control panel and bezel.
Attach bezel to control panel and valve control stem with 2 screws as shown. Be sure to attach bezel
with black indicator mark facing straight up. Press Knob onto side burner valve control stem. Make
sure the side burner valve is inserted into the side burner, then insert and tighten the 2 previously
removed screws, t_]
M4 x 8 Screw
Qty.2
Side Burner Valve
Side Burner Shelf
Bezel
Knob
Side Burner Valve Control Stem
20