Bikes - Vision Fitness E3600HRT Owner's Manual

TROUBLESHOOTING YOUR FITNESS BIKE
Our Bikes are designed to be reliable and easy to use. If, however, you
have a problem, these troubleshooting steps may indicate the cause.
PROBLEM: The Console does not light up.
SOLUTION: 1) Pedal bike to light up console.
SOLUTION: 2) Replace 9-volt battery in back of console.
PROBLEM: The Bike is making a
clicking noise.
SOLUTION:
wrench, remove both the right and
left pedals. Apply grease to the
threaded portion of the pedals
and reassemble the unit, making
sure the pedals are as tight as pos-
sible.
PROBLEM: The Bike appears to work, but there is no resistance change.
SOLUTION: The magnetic brake assembly is not working properly; please
contact your retailer.
PROBLEM: The Bike makes a squeaking or creaking noise.
SOLUTION: Check and tighten all the bolts on the Bike again.
PROBLEM: The seat on your
recumbent bike rocks from side to
side.
SOLUTION:
wrench, loosen the Fixing Nuts on
the side of the seat frame. With an
18
11mm wrench, pivot the Adjusting
Post so the Fixing Nut is at the top
of the slot. Tighten the Fixing Nut
with the 13mm wrench.
NOTE: If the above steps do not remedy the problem, discontinue use and
contact your retailer.
Using a 15mm
With a 13mm