DSC-P100/P120
3. Preparing the Flash Adjustment Box
A dark room is required to provide an accurate flash adjustment.
If it is not available, prepare the flash adjustment box as given
below;
1) Provide woody board A, B and C of 15 mm thickness.
woody board A (2)
400 mm
730 mm
2) Apply black mat paint to one side of woody board A and B.
3) Attach background paper (J-2501-130-A) to woody board C.
4) Assemble so that the black sides and the background paper
side of woody board A, B and C are internal. (Fig. 6-1-6)
woody board B (2)
513 mm
woody board B
woody board C
370 mm
513 mm
700 mm
Fig. 6-1-5
woody board A
woody board B
woody board A
Fig. 6-1-6
6-6
woody board C (1)
700 mm
700 mm