Picture Frame Setting - Sony DCR-DVD100 Service Manual

DCR-DVD100/DVD100E

8. Picture Frame Setting

Subject
Measurement Point
Measuring Instrument
Specified Value
Note1: The following adjustments should be carried out upon completion
of "Flange back adjustment" and "Optical Axis Adjustment".
Note2: The data of page: 0, address: 10 must be "00".
Switch setting:
1) MODE ............................................................. MOVIE (
2) NIGHT SHOT .................................................................. OFF
3) FOCUS .................................................................. MANUAL
4) DIGITAL ZOOM (Menu setting) .................................... OFF
5) STEADY SHOT (Menu setting) ...................................... OFF
Setting method:
1) Select page: 6, address: 48, and set data: 02.
2) Adjust the zoom and the camera direction, and set to the
specified position.
3) Mark the position of the picture frame on the monitor display,
and adjust the picture frame to this position in following
adjustments using "Color reproduction adjustment frame".
Processing after Completing Camera System Adjustments:
After completing the camera system adjustments, release the data
settings.
1) Select page: 6, address: 48, and set data: 00.
Color bar chart
(Color reproduction adjustment frame)
(1.5m from the front of the lens)
Video terminal of AUDIO/
VIDEO jack
Oscilloscope and TV monitor
A=B, C=D, E=F
Check on the oscilloscope
1. Horizontal period
)
A=B
B
A
2. Vertical period
E
Check on the monitor TV (Underscanned mode)
Color bar chart picture frame
6-20
C=D
C
D
Fig. 6-1-9.
E=F F
V
Fig. 6-1-10.
Monitor TV picture frame
Fig. 6-1-11.