Spark Arrester - KYMCO MXU 500 User Manual

Hide thumbs Also See for MXU 500:

Table of Contents

. INSPECTION/ADJUSTMENT

6. Remove the oil level check bolt (3).

Make sure the oil level reaches the oil

level check hole.

7. Install and tighten the oil filler bolt and

oil level check bolt to the specified

Oil filler cap:

3.5 kgf-m (35 N-m, 25.5 lbf-ft)

Oil level check bolt:

1 kgf-m (10 N-m, 7.2 lbf-ft)

Be sure no foreign material enters the

SPARK ARRESTER

Be sure the exhaust pipe and muffler are

cool before cleaning the spark arrester.

1. Remove the three bolts (1).

2. Remove the spark arrester (2) and the

gasket (3) from the muffler.

Table of Contents