Installation; Combination Brake Fluid Chang - KYMCO MXU 500 User Manual

Hide thumbs Also See for MXU 500:

Table of Contents

. BRAKE SYSTEM

INSTALLATION

Install and tighten the mounting bolts to the

specified torque.

Torque: 1.2 kgf-m (12 Nm, 8.6 lbf-ft)

Install the all brake fluid hoses with the

attaching bolts and new sealing washers,

then tighten the bolts to the specified torque.

Torque: 3.5 kgf-m (35 Nm, 25 lbf-ft)

Fill the specified brake fluid and bleed air

from the brake system (refer to the

"COMBINATION BRAKE FLUID

CHANGE/AIR BLEED (ON ROAD)"

section in this chapter).

Table of Contents