Rear Axle Housing Removal/Inspection/Installation - KYMCO MXU 500 User Manual

15.
REAR WHEEL/AXLE/SHOCK
ABSORBER/SWING ARM
REAR AXLE HOUSING
REMOVAL/INSPECTION/
INSTALLATION
REMOVAL
Remove the rear axle (refer to the "REAR
AXLE REMOVAL/INSPECTION/
INSTALLATION" section in this chapter).
Remove the bolt from skid plate under the
left axle housing.
Remove the four nuts/bolts from the left
housing (attaching the rear swing arm).
Remove the four nuts from the left housing
(attaching the rear drive case).
Remove the left rear axle housing from the
rear drive case.
Do not lose the axle collar in the left rear
axle housing.
Skid Plate
Collar
MXU 500
Rear Axle Housing
15-8