Carburetor Disassembly/Inspection/Assembly - KYMCO MXU 500 User Manual

5
. FUEL SYSTEM
CARBURETOR
DISASSEMBLY/INSPECTION/
ASSEMBLY
DISASSEMBLY
Remove the carburetor (refer to the
"CARBURETOR REMOVAL/CHOKE
INSPECTION/INSTALLATION" section in
this chapter).
Loosen the drain screw to drain the gasoline
from the float chamber.
• Keep sparks and flames away from the
work area.
• Drain gasoline into a clean container.
• Do not loosen or tighten the painted
bolts and screws of the carburetor.
Loosening or tightening them can
cause throttle and piston valve
synchronization failure.
Remove the four screws and top cap
.
Remove the spring and piston valve.
5-9
Fuel Drain Plug
Top Cap
Spring
Piston Valve
MXU 500