14.
FRONT WHEEL/FRONT SUSPENSION/
STEERING SYSTEM
STEERING KNUCKLE
REMOVAL/INSPECTION/
INSTALLATION
REMOVAL
Elevate the front wheels by placing a
suitable stand under the frame.
Support the machine securely so there is
no danger of it falling over.
Remove the front wheel hub (refer to the
"FRONT WHEEL HUB
REMOVAL/INSPECTION/
INSTALLATION" section in this chapter)
Remove the three bolts and brake disc
protection plate.
Remove the cotter pin and nut from the tie-
rod end.
Remove the cotter pin and nut from the
upper arm end.
Remove the cotter pin and nut from the
steering knuckle end.
Steering Knuckle
MXU 500
Plate
14-8