Fuel Tank; Fuel Valve - KYMCO MXU 500 User Manual

5
. FUEL SYSTEM

FUEL TANK

REMOVAL
Warning
• Keep sparks and flames away from the
work area.
• Wipe off any spilled gasoline.
Remove the seat, right and left side frame
cover and fuel tank cover (refer to the
"FRAME COVERS" section in the chapter
2).
Switch the fuel valve "OFF".
Remove the 2 mounting bolts.
Disconnect the fuel tube from carburetor.
Disconnect the fuel unit connectors.
Remove the two bolts and two nuts from the
fuel tank, then remove the fuel tank.
INSTALLATION
Fuel tank installation is in the reverse order
of removal.

FUEL VALVE

REMOVAL
• Keep sparks and flames away from the
work area.
• Drain gasoline into a clean container.
Remove the screw and then remove control
switch.
Disconnect all fuel tubes and remove the two
screws, then remove fuel valve.
Fuel Valve
Fuel Unit Connectors
Control Switch
Fuel Tube
MXU 500
Fuel Tube
Fuel Tubes
5-4