Factory/Service Mode Menu Table - Citizen CL-S6621 Technical Manual

Operation Panel

(3-3) Factory/Service Mode menu table

The following table shows the value and description of each submenu under Factory Mode
menu and Service Mode menu.
(a) Factory Mode menu table
*: "+" shows that the object logically moves forward/rightward. "-" shows that the object
logically moves backward/leftward.
**: 8 dots correspond to 1 mm for each adjustment value. (Namely, 203 dots correspond
to 1".)
Submenu Name
Through Sensor
Position
(See Note.)
Reflect Sensor
Position
(See Note.)
Mach Tear Pos
Mach Cut Pos
Mach Peel Pos
Mach Hor Pos
AutoCal Mode
SeeThrough
Sensor
Reflect Sensor
SeeThrough
Sensitivity
Reflect Sensitivity
Darkness Rate
Double Heat
Menu
CL-S6621
Adjustable Value
(Default Value)
-256 to +256 [dots]
(+000 [dots])
-256 to +256 [dots]
(+000 [dots])
-256 to +256 [dots]
(+000 [dots])
-256 to +256 [dots]
(+000 [dots])
-256 to +256 [dots]
(+000 [dots])
-16 to +32 [dots]
(+00 [dots])
ON, OFF
(ON)
0.0 to 3.3 [V]
(0.0 [V])
0.0 to 3.3 [V]
(0.0 [V])
Low, Medium, High
(Low)
Low, Medium, High
(Low)
High, Low
(High)
ON, OFF
(OFF)
Description
Logically shifts the transparent sensor position
back and forth. (-32 to +32 mm, -1.26 to +1.26")
Logically shifts the reflective sensor position back
and forth. (-32 to +32 mm, -1.26 to +1.26")
Logically shifts the tear off position back and forth.
(-32 to +32 mm, -1.26 to +1.26")
Logically shifts the cutting position back and forth.
(-32 to +32 mm, -1.26 to +1.26") (Optional)
Logically shifts the peel position back and forth.
(-32 to +32 mm, -1.26 to +1.26") (Optional)
Logically shifts the head position right and left.
(-2 to +4 mm, -0.08 to +0.16")
Automatically controls the light amount in each
Media sensor menu (See Through, Reflect, None).
This menu is effective when "AutoCal Mode" is set
to OFF. The light amount in Media sensor menu
"See Through" can be changed manually.
Larger value emits larger amount of light.
This menu is effective when "AutoCal Mode" is set
to OFF. The light amount in Media Sensor menu
"Reflect" can be changed manually.
Larger value emits larger amount of light.
This menu is effective when "AutoCal Mode" is set
to OFF. The sensitivity of the transparent sensor
can be changed in 3 levels.
This menu is effective when "AutoCal Mode" is set
to OFF. The sensitivity of the reflective sensor can
be changed in 3 levels.
The rate for darkness increase/decrease can be
set.
To display the item "Double Heat Menu" in the
"PageSetup Menu" or not is selectable.
2-54