Factory/Service Mode Menu Table - Citizen CLP-621 Technical Manual

2-3. Operation Panel

(3-3) Factory/Service Mode menu table

The following table shows the value and description of each submenu under Factory Mode
menu and Service Mode menu.
(a) Factory Mode menu table
*: "+" shows that the object logically moves forward/rightward. "-" shows that the
object logically moves backward/leftward.
**: For both CLP-621 and CLP-631, 8 dots correspond to 1 mm for each adjustment value.
(Namely, 203 dots correspond to 1".)
Submenu Name
Through Sensor
Position
(See Note 1.)
Reflect Sensor
Position
(See Note 1.)
Machine Tear
Position
Machine Cut
Position
Machine Peel
Position
Machine
Horizontal Pos.
AutoCal Mode
See Through
Sensor
Reflect Sensor
Note 1 :
"Through Sensor Position" adjustment and "Reflect Sensor Position" adjustment must be
done if one of the following parts is replaced.
• Main PCB Unit
• Transparent Sensor PCB SA
• Reflective Sensor PCB SA
CLP-621 & CLP-631
Adjustable Value
(Default Value)
-256 to +256 [dots]
(+000 [dots])
-256 to +256 [dots]
(+000 [dots])
-256 to +256 [dots]
(+000 [dots])
-256 to +256 [dots]
(+000 [dots])
-256 to +256 [dots]
(+000 [dots])
-16 to +32 [dots]
(+08 [dots])
ON, OFF
(ON)
0.0 to 3.3 [V]
(0.0 [V])
0.0 to 3.3 [V]
(0.0 [V])
Description
Logically shifts the transparent sensor position
back and forth. (-32 to +32 mm, -1.26 to +1.26")
Logically shifts the reflective sensor position back
and forth. (-32 to +32 mm, -1.26 to +1.26")
Logically shifts the tear off position back and forth.
(-32 to +32 mm, -1.26 to +1.26")
Logically shifts the cutting position back and forth.
(-32 to +32 mm, -1.26 to +1.26") (Optional)
Logically shifts the peel position back and forth.
(-32 to +32 mm, -1.26 to +1.26") (Optional)
Logically shifts the head position to the right or left
side.
(-2 to +4 mm, -0.08 to +0.16")
Automatically controls the light amount in each
Media sensor menu (See Through, Reflect, None).
This menu is effective when "AutoCal Mode" is set
to OFF. The light amount in Media sensor menu
"See Through" can be changed manually.
Larger value emits larger amount of light.
This menu is effective when "AutoCal Mode" is set
to OFF. The light amount in Media Sensor menu
"Reflect" can be changed manually.
Larger value emits larger amount of light.
2-44