5. Peel off the label from liner (base) and set the liner part to the printer. Be sure that the
normal adjustments for printing are correctly made.
• Media sensor menu: "See Through"
• Sensor positioning for the liner
6. Press the [FEED] key to enter the transparent sensor adjustment mode.
7. Press the [PAUSE] key to move the cursor to "Exec.".
8. Press the [FEED] key to perform adjustment.
Liner is automatically fed little by little and adjustment is performed.
During adjustment, the following screen appears.
When adjustment is successful, "Finished DAC XXX" is displayed.
*The value "143" is one of samples.
3-57
Adjustments
CL-S6621