Disassembly, Reassembly and Lubrication
3-6-4. SA, Fan
(1) Removing the ribbon covers
1. Open the "Cover Top" Block and remove the "Unit, Ribbon". Refer to
2. On the right, remove the 2 screws (BH, M3x4 (NI)) and detach the "Cover Ribbon Frame
R".
3. On the left, remove the 2 screws (BH, M3x4 (NI)) and detach the "SA2, Ribbon Unit Fan" to
the left after lifting it to unhook the claws "A" from the chassis.
BH, M3x4 (NI)
Note on reassembling:
• When assembling the "Cover Ribbon Frame R", pass the wires of the front side cable
through the opening "B" (not "C").
(2) Removing the "SA, Fan"
1. Remove the 4 screws (PHT (#2), M3x6) and 4 washers (Plain, 3x8x0.5), and detach the
"Bracket Ribbon Fan" (2 pcs.).
2. Remove the "SA, Fan" from the "Cover Ribbon Frame L".
CL-S6621
SA2, Ribbon Unit Fan
106
*
Cover Ribbon Frame L
SA, Fan
Bracket Ribbon Fan
Plain, 3x8x0.5
J106
3-18
"3-6-2 Unit,
Ribbon".
Cover Ribbon Frame R
BH, M3x4 (NI)
*
+
PHT (#2), M3x6