Holder, Ribbon Shaft" And "Holder 2 Tension Spring - Citizen CL-S6621 Technical Manual

Disassembly, Reassembly and Lubrication

3-6-7. "Holder, Ribbon Shaft" and "Holder 2 Tension Spring"

1. Open the "Cover Top" Block .
2. Release the lock by moving the part "A" toward the right and remove the "Holder, Ribbon
Shaft" (2 pcs.) toward the front.
3. Remove the 2 screws (PHT (#2), M3x6) and detach the "Holder 2 Tension Spring".
HT (#2), M3x6
Holder, Ribbon Shaft
Holder 2 Tension Spring
Holder, Ribbon Shaft
3-22
CL-S6621