System board
NOTE:
All system board spare part kits include replacement thermal material.
NOTE:
System board appearance may vary.
Description
System board for use in models without Windows 8.1
System board for use in models with Windows 8.1 Standard
System board for use in models with Windows 8.1 Professional
System board for use in models with NetClone (the People's Republic of China only)
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
When replacing the system board, make sure the following components are removed from the defective
system board and installed on the replacement system board:
●
Memory modules
●
Expansion cards
●
Fan sink
●
Processor
4.
Disconnect all cables connected to the system board, noting their location for reinstallation.
5.
Remove the eight Torx T15 screws that secure the system board to the chassis.
66
Chapter 5 Removal and replacement procedures: Microtower
(Access panel on page
(Memory on page
(Expansion cards on page
(Fan sink on page
54).
(Processor on page
56)
(Preparation for disassembly on page
26).
29)
32)
25).