Removing A 2.5-Inch Hard Drive - HP ProDesk 480 G2 Maintenance And Service Manual

Removing a 2.5-inch hard drive

NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that
you can transfer the data to the new hard drive.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Disconnect the power cable and data cable from the back of the hard drive.
4. Disconnect the power cable and data cable from the back of the hard drive.
5. Remove the four 6-32 mounting screws (1) and slide the drive out of the bay (2).
(Preparation for disassembly on page
(Access panel on page 26)
25)
Drives 43