Wlan Module - HP ProDesk 480 G2 Maintenance And Service Manual

WLAN module

Description
HP WLAN 802.11 a/b/g/n + Bluetooth 4.0
Intel Dual Band Wireless-N 7260NB 802.11 a/b/g/n 2x2 WiFi + BT4.0
You can install a WLAN module using a PCIe expansion card. The module is secured to the expansion card
with two Phillips screw and has two connected antennas.
To remove the WLAN module:
1. Prepare the computer for disassembly
2. Remove the access panel
3. If replacing a WLAN module, remove the PCIe card that houses the module
on page
- or -
If installing a WLAN module, connect the module to the PCIe card, and then install the PCIe card in the
computer
4. To remove a WLAN module, disconnect the antenna cables from the module (1).
(Access panel on page
32). Go to step 4.
(Expansion cards on page
(Preparation for disassembly on page
26)
32). Go to step 7.
25)
(Expansion cards
WLAN module 45